This Profile Drawing As Below Picture:
profile1:
Material: 0.7mm Minimum Thickness, 1.5mm Maximum Thickness
0.9mm is for inspection, 1.5mm Maximum Thickness
Galvanized Coil, Yield Strength:550Mpa
profile2:
Material: 0.7mm Minimum Thickness, 1.5mm Maximum Thickness
1.0mm is for inspection, 1.5mm Maximum Thickness
Galvanized Coil, Yield Strength:435Mpa,550Mpa
General Parameter
|
1
|
Item
|
Parameters
|
|
2
|
Model NO.
|
Cold Rolling Mislls for Deck (CASSETTE CHANGING)
|
|
3
|
Material
|
Galvanized sheet
|
|
4
|
Thickness
|
0.7-1.5 mm
|
|
5
|
Yield Strength
|
345Mpa,550Mpa
|
|
6
|
Feed Width
|
870/1000
mm
|
|
7
|
Effective width
|
600/627 mm
|
|
8
|
Roll Stages
|
38 Stages
|
|
9
|
Shafts Diameter
|
ф95 mm
|
|
10
|
Main Motor Power
|
11 KW
|
|
11
|
Hydraulic Group Power
|
4 KW
|
|
12
|
Max. Line Speed Of Roll Former
|
Approx.15 m/min
|
|
13
|
Electric Standard
|
According to local voltage
|
Machine Components
A.
5Ton X 1250mm Hydraulic Un-coiler
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Load capacity = Max.5Tons
Coil Inner-diameter= 510±30 mm, Coil width = Max.1250mm
Automatic stopping device with limited switch as assistance to control stop/start rotation
B. Entry Bench Un-powered
C. Hydraulic Pre-shearing device, manual control (Extra Cost,OPTIONAL)
Share in the same hydraulic group with post cutting device
Only for cutting the first piece and the end piece of the sheet
One extra stage with rubber shaft required in front of the pre-shearing device
D. Cold Rolling Mills
Feeding setion with guide
Gear/Sprocket driving
Base frame,Main motor =15KW ×2,Frequency spped control;
Max. Line speed of roll former: Approx. 15m/min
Wall-plate-frame-design, cassette type.
The BASE IS REQUIRED TO FIT 38 STEPS,
Cassette 1 for profile 1, profile 2; 34-step to form
Rollers manufactured from 45 # Steel, CNC lathes, heat treatment hard
Chrome Coated
Shafts Diameter=Φ95mm, Precision Machined
Cassette 2 for profile 2; 20-step to form
Rollers manufactured form 45# steel, CNC lathes, heat treatment, hard Chrome Coated
Shafts Diameter=Φ95mm, Precisin Machined
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
E.Hydraulic Cutting M/C
Cutting tool material:Cr12MOV,Heat treatment
Hydraulic group,Pump motor =11KW
< Cassettes Share the same Hydraulic Station >
Two sets of cutting tools
Cassette 1: Hydraulic Cutting device for profile 1
Stop to Cut, Post Cut, Slug breaker
Cassette 2: Hydraulic Cutting device for profile 2
Stop to Cut, Post Cut, Slug breaker
F. PLC Control System
Control the quantity & cutting length automatically
Combined with:PLC, Touch Screen(SIEMENS), Inverter (SCHENIDER),Encoder(Omron), etc
Cut-to-lenth toerance≤±2mm
Control Voltage 24V
G. Product Rack Un-powered,6 meters length
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment:
Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment:
30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
