Leading the roll forming industry since1989, Zheng Liming, your best choice.


At present, the basic rules of design in our company are to keep customer-oriented and industry-driven. Our YX32-333-1000 Rolling Mills for Roof Panelhas a look that is unique enough to grab the attention of most of the customers. Moreover, it has the tested performance and so on. These aspects can prove the value of the product. Technology is the core competitiveness of a company. Since established, we have been researching and developing high-level technologies to make sure highly efficient manufacturing process.It covers a wide range and is commonly seen in the application field(s) of Tile Making Machine. We have an experienced team consisting of several industry experts. They have years of experience in manufacturing and designing PRODUCTS.In the past months, they have been focusing on improving the practical use of the product, and finally they made it. Proudly speaking, our product enjoys a wide application range and can be very useful when applied in the field(s) of Roofing Sheet Making Machine, Ridge Cap Roll Forming Machine, Purlin Machine, Floor Decking Roll Forming Machine, Light Gauge Steel Framing Machine, BIPV.

Product Description

This Profile Drawing As Below Picture: YX32-333-1000 Rolling Mills for Roof Panel

General Parameter
1 Item Parameters
2 Model NO. YX32-333-1000
3 Material galvanized sheet
4 Thickness 0.4-0.7 mm
5 Yield Strength 450 MPa
6 Feed Width 1145 mm
7 Effective width 1000 mm
8 Roll Stages 20 Stages
9 Shafts Diameter ∅75/95 mm
10 Main Motor Power 7.5 KW
11 Hydraulic Group Power 4 KW
12 Max. Line speed of roll former Approx. 15 m/min
13 Electric Standard According to local voltage

Machine Components
A. 5 Ton X 1250 Hydraulic Un-coiler
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Load capacity = Max.5Tons
Coil Inner-diameter= 510±30 mm mm, Coil width = Max.1250mm
Automatic stopping device with limited switch as assistance to control stop/star rotation
YX32-333-1000 Rolling Mills for Roof Panel

B. Entry roller & Manual Pre-shearing device              Un-powered
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.8mm
YX32-333-1000 Rolling Mills for Roof Panel

C.  Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;20-step to form;
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75/95mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Max. liner Forming speed:Approx. 15m/min;
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside

YX32-333-1000 Rolling Mills for Roof Panel

D. Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Hydraulic unit, Pump motor =4KW
Cutting tool material : Cr12MOV, Heat treatment;

YX32-333-1000 Rolling Mills for Roof Panel

E. Electric accessories, Including
Counting wheel and encoder
Limit switches (upper/lower), photoelectric switch for cutting device
Wiring arrangement
Cut-to-length tolerance due to the control system supplied by user (Liming standard is ≤±2 mm)

F. Product Rack Un-powered, 3 units
YX32-333-1000 Rolling Mills for Roof Panel YX32-333-1000 Rolling Mills for Roof Panel
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.

Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Basic Information
  • Year Established
  • Business Type
  • Country / Region
  • Main Industry
  • Main Products
  • Enterprise Legal Person
  • Total Employees
  • Annual Output Value
  • Export Market
  • Cooperated Customers

contact US


The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.


They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.


Send your inquiry

Choose a different language
Tiếng Việt
Current language:English