XIAMEN ZHENG LIMING - YX52-234-936 Cold Rolling Mills for Floor Decking PRODUCTS

XIAMEN ZHENG LIMING METALLURGICAL MACHINERY CO.,LTD still remembered the time when we successfully developed the new product - YX52-234-936 Cold Rolling Mills for Floor Decking. The product is absolutely new and has something different in it. YX52-234-936 Cold Rolling Mills for Floor Decking attaches great importance to technological innovation in the research and development process. XIAMEN ZHENG LIMING METALLURGICAL MACHINERY CO.,LTD will always adhere to the business philosophy of honesty, innovation, integrity to run our business. We believe that with the combined efforts of all our employees, we have enough skills and capabilities to overcome all obstacles and difficulties to make some achievements in the future.

Product Description

This Producing Process Sketch As Below Picture:



This Profile Drawing As Below Picture:

General Parameter

1	Item	Parameters
2	Model NO.	YX52-234-936
3	Material	Pre-painted galvanized sheet
4	Thickness	0.8-1.6 mm
5	Yield Strength	240-550 MPa
6	Feed Width	1220mm
7	Effective width	936 mm
8	Roll Stages	18.5 Stages
9	Shafts Diameter	∅95 mm
10	Main Motor Power	11 KW
11	Hydraulic Group Power	7.5KW
12	Max. Line speed of roll former	Approx. 15 m/min
13	Electric Standard	According to local voltage

Machine Components

A.  10Ton* 1300mm Hydraulic un-coiler with coil car
Hydraulic system to expand coil inner hole, Pump motor: 5.5KW
Taper wedge expand type
Double level expanding palms with two coil bore variations of 480-530 for Palm 1 and 580-630 for Palm 2
Load Capacity: Max. 10 Tons; Coil Width Max. 1300mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to turn the coil, Motor: 11KW
One support arm installed at the end of un-coiler mandrel
With coil car - The original design
Up/Down stroke of Coil Car: Max. 450mm;
Forward/backward stroke of Coil Car: Max. 2000mm

B. Feeding section with guide; Wall-plate-frame Design
Gear/Sprocket driving;30-step to form;including embossing steps.
Rollers manufactured from 40Cr, CNC lathes, hard Chrome Coated
Diameter of shaft=ф95mm;Main motor =18.5KWX2
Frequency speed control;Max line speed for roll former:15m/min;
Protection mesh cover above the roll form to avoid the hands going it
The following picture is for reference only

C. Hydraulic Cutting M/C
Stop to cut, Post cut, Slug Breaker;
Pump motor =7.5KW
Cutting tool material: Cr12, Heat treatment
One extra cutting blade as spare


D. PLC Control System
Control the quantity & cutting length automatically.
Control the switch action to run the different two profiles
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider),
Encoder (Omron) , etc
Cut-to-length tolerance≤±2 mm
Control voltage 24V


E. Product Rack Un-powered, 3 units

After-Sale Service

In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.

Terms Of Trade

1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --