Leading the roll forming industry since1989, Zheng Liming, your best choice.

Language
VR

XIAMEN ZHENG LIMING METALLURGICAL MACHINERY CO.,LTD devotes many years to developing and producing superb Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof as well as offering professional customer service. Our Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof raw material is pure and high quality providing best results and longer support throughout your use. Since the beginning,XIAMEN ZHENG LIMING METALLURGICAL MACHINERY CO.,LTD have been sticking to the business principle of 'integrity' and bearing the mind of 'offering customers the best of us'. We are fully confident that we will make a great success in the future.


Product Description


This Producing Process Sketch As Below Picture:
Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof


This Profile Drawing As Below Picture:

Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof

General Parameter
1 Item Parameters
2 Model NO. YX30-200-1000/1200
3 Material Pre-painted galvanized sheet
4 Thickness 0.3-0.8 mm
5 Yield Strength 550 MPa
6 Feed Width 1220/1445 mm
7 Effective width 1000/1200 mm
8 Roll Stages 26 Stages
9 Shafts Diameter ф95 mm
10 Main Motor Power 15 KW
11 Hydraulic Group Power 11KW
12 Max. Line Speed Of Roll Former Approx.18-20 m/min
13 Electric Standard According to local voltage

Machine Components

A. (5+1 )Ton X 1500mm Hydraulic Un-coiler (with support arm)
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Hydraulic Pressure keeping function
Load capacity = Max.6Tons
Coil Inner-diameter= 470-650 mm, Coil width = Max. 1500mm
Automatic stopping device with limited switch as assistance to control stop/star rotation



Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof





B. Entry bench and Manual Pre-shearing device
Entry bench and Manual Pre-shearing device
Working thickness: up to 0.8mm
Smart cut control, to cut off the end of the final piece of sheet only
Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof
C.  Polythene Film-on Device
Un-powered film-on device to cover plastic film on the surface of sheet

Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof

D . Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;26 stages to form
Wall-plate-frame design

Rollers manufactured from 45# steel, CNC lathes, hard chrome coating
Shafts Diameter=ф95mm, Precision Machined
Main motor =15KW , Frequency speed control
Max line speed of roll former: Approx.18-20m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside


Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof

E. Hydraulic Stair-Drawing & Cutting M/C
Stop to press, Stop to cut; Post cut, No Blanking cut
Dropping cutting device
Cutting tool material: Cr12, Heat treatment
Stair depth=18mm
Profiles can be with stairs and without stairs, without stairs is blank profile
Pump motor =11KW with Accumulator
4- pillars structure instead of old frame design



F. PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen, Inverter (SIEMENS), Encoder (Omron), REMOTE CONTROL etc

Cut-to-length tolerance≤±2 mm
Control Voltage 24V

Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof

G. Product Rack Un-powered, 3 units
Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof Yx30-200-1000/1200 Cold Rolling Mills for Tile Roof
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.

Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

contact US

GET IN TOUCH WITH US

The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.

Recommended

They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.

Chat
Now

Send your inquiry

Choose a different language
English
Tiếng Việt
Türkçe
ภาษาไทย
বাংলা
русский
Português
한국어
français
Español
Deutsch
العربية
Current language:English