loading

Leading the roll forming industry since1989, Zheng Liming, your best choice.

Language
PRODUCTS
VR

After months of furious yet meaningful development work, XIAMEN ZHENG LIMING METALLURGICAL MACHINERY CO.,LTD has made it a great success to work out New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine. The product is supplied with multiple features and a broad range of applications. Processed by elaborate craft, the appearance of New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine is vivid. The design is the most striking aspect of XIAMEN ZHENG LIMING. Its design comes from our designers who are sensitive to fashion and are know the commercial needs of the market very well. Also, Roofing Sheet Making Machine, Ridge Cap Roll Forming Machine, Purlin Machine, Floor Decking Roll Forming Machine, Light Gauge Steel Framing Machine, BIPV made of well-selected raw materials.


Product Description

This Profile Drawing As Below Picture:
New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine

General Parameter
1 Item Parameters
2 Size C/U50-100
3 Material Galvanized Steel
4 Thickness 1.5-3.0 mm
5 Yield Strength 350-400 MPa
6 Feed Width According to the profile
7 Forming speed Approx.25 m/min
8 Roll Stages 15 Stages
9 Main Motor Power 30 KW (Servo Motor)
11 Shafts Diameter ф75/95 mm
12 Electric Standard According to local voltage

Machine Components
A.  5Ton*650mm Hydraulic Un-coiler
Hydraulic system to expand coil inner hole;Pump motor: 3KW ;
Frequency Inverter to regulate turn speed; Motor :3KW
Coil Inner-diameter= 470-560mm. Coil Outer-diameter Max. 1600mm;
Link-connect expanding system
Load Capacity: Max. 5 Tons; Coil Width Max. 650mm;
Hydraulic Holder on the top to hold the sheet, keep press all the working time, special design on the hydraulic group

New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine

B.  Pre-Leveling Device
The In-feed Section of the machine allows for variations in sheet width
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine
C. Hydraulic Pre-cutting / Pre-Punching device
Sheet feeding guide section
Stop to Punch, stop to cut
Hydraulic Pre-shearing device, manual control, only for cutting the first piece and the end piece of the sheet
Hydraulic Group, Pump motor =18.5KW
New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine

D.  Cold Rolling Mills
The feeding section with guide;
Gear/Sprocket driving, 15- step to form
Rollers manufactured from Cr12, CNC lathes,Heat Treatment.
Shaft Diameter=Φ75mm, Precision Machined,
Motor 4, 5 is the main driving power to run the rollers and sheet go forward, frequency speed control
Main motor =30KW (Servo motor)
Max. Line speed of roll former: approx. 20-25 M/Min without punching

New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine
E.  Hydraulic post Cutting
Stop to Cut, Post Cut
Innovative cutting system
Different cutting sizes adjustable by screw
Cutting tool material: Cr12Mov

New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine
F.  PLC Control System
Control the quantity, punching position & cutting Length automatically, and setting parameters for auto web/flank size changing
Cut-to-length for post-cut,
Combined with: PLC, Touch Screen ( SIEMENS ),Inverter (SCHNEIDER) , Encoder (Omron), etc
Closed Loop control,
Cut-to-length tolerance≤±1 mm
Control Voltage 24V
New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine

G.  Run-out Rack    6 meters, un-power


New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine
New Customized Light Frame Steel Building Cu Stud Frame Purlin Roll Forming Machine

After-Sale Service

Installation:
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.

Terms Of Trade
  1. Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
  2. Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

contact US

GET IN TOUCH WITH US

The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.

Recommended

They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.

Chat
Now

Send your inquiry

Choose a different language
English
Tiếng Việt
Türkçe
ภาษาไทย
বাংলা
русский
Português
한국어
français
Español
Deutsch
العربية
Current language:English