Common problems that may occur in cold roll forming opportunities

XIAMEN ZHENG LIMING Roll Forming Machinery Co., Ltd. will explain to you today in detail the common problems that may occur when rolling forming machines are used. Before the rolling forming machine is applied, please make sure to choose a flat cabinet countertop for placement to ensure that the equipment is not unstable, and then open the main cabinet legs for easy observation. Then insert the power plug into the control panel and tighten it. Secondly, insert one end of the power plug into the control panel on the back of the main box, and the other end into the switching power supply. It is stipulated that the single-phase three-wire switching power supply should be used in general. Then turn on the power switch behind the main box, and then perform the actual operation in a certain way and adjust it to a certain value. After that, until the emerald green indicator light comes on and a prompt sound appears, the next job is in the sealing work, and then check the sealing quality, and perform actual operations according to different materials to ensure the sealing. **Quality assurance. Mandatory maintenance of the rolling forming machine is very important: excellent maintenance of all industrial equipment is an important step to extend its service life. From the perspective of the entire application cycle time of the rolling forming machine, use, maintenance and overhaul account for the vast majority of the total service life of the rolling forming machine, and it is also the guarantee for the rolling forming machine to give full play to its practical value. The construction volume of cold roll forming machine projects is large, the daily tasks are complex, the project investment is high, the construction period is short, and the periodicity is strong. The cold roll forming machine needs to be maintained compulsorily, and the long-term field operation needs to be maintained compulsorily. This is very important for equipment in harsh environments. According to the analysis of common faults, 56% of cold roll forming machines are due to concerns about maintenance issues, 38% of the reasons are due to maintenance errors on time, and 6% of the reasons are due to operation errors. Therefore, mandatory maintenance is necessary for cold bending machines. Why does cold drawing forming equipment perform well in lubrication work: lubrication can be intermittent and sustainable over time. According to daily maintenance, if the equipment is not working, it is only necessary to change the oil once every six months, but if the equipment is running, the second and third lubrication time should be between 20 and 30 days. If the time is right, there is no need for a long time interval. When the equipment is running, pay attention to whether the oiler is filled with oil when the spindle bearing is working. If a common fault occurs, maintenance should be terminated immediately. Moreover, if the car tank is not clean and tidy, other engine oils or oil replenishment cannot be used to prevent damage to the rolling bearing. In short, the operation of the equipment is performed through the cooperation of several components. Therefore, doing a good job of normal lubrication can also better make the cold drawing forming equipment run more powerfully, thereby improving work efficiency and reducing quality time. The above is the content sharing brought to us by the cold roll forming machine manufacturer today. If you have any needs for our company's products, please contact the online customer service for detailed inquiries and quotation information. You are also welcome to come to our company for inquiries. We sincerely invite you to cooperate with us!.